This IM6D Ice maker kit will work on many GE built refrigerators. The IM6D is a complete add on ice maker kit and can be used on many models of GE, Hotpoint manufactured refrigerators made from 1987 to the present.
This kit will work on GE refrigerator models that have a sticker of one of the following letters on the back side of the refrigerator: LMQRSTUV or W. This IM6D kit includes the icemaker, single valve-water valve, fill tubes, two ice buckets, installation instructions and hardware for the installation.
( This kit does not come with the round adapter plug, part # WR29X10049 4 to 6 pin. It will need to be ordered separately. )
This WR30X10093 kit includes, the ice maker, 4 pin round plug in connector, 6 post plug in connector, fill cup and tube. This GE ice maker has a 7 crescent ice mold tray.
If your GE ice maker is not functioning properly, it could be the water valve is defective or the freezer temperature is not cold enough. The freezer temperature should be around 0 degrees Fahrenheit, for the icemaker to function properly and produce ice cubes. This WR30X10093 ice maker kit is also used on some Hotpoint and RCA model refrigerators.
The GE ice maker is an independent appliance that is installed in the freezer compartment of the refrigerator. The ice maker has three distinct operations, to fill with water, freeze the water and harvest the ice cubes.
If your GE ice maker has stopped producing ice or dumping the ice cubes out or will not fill with water there are replacement parts in most cases for most make and models to repair your ice maker. The water inlet valve, module, ice lever/bale arm, ice maker mold with heater or drive gear. In some cases you can purchase a brand new OEM GE ice maker or an ice maker kit that comes with an ice bucket and water fill valve for just about the same price that it will cost in parts to repair the old ice maker, not to mention your time and labor.
GE Refrigerator Ice Maker