This IM6D Ice maker kit will work on many Hotpoint refrigerators. The IM6D is a complete add on ice maker kit that can be installed on many models of Hotpoint, GE manufactured refrigerators made from 1987 to the present.
This IM6D kit includes the icemaker, single valve-water valve, fill tubes, two ice buckets, installation instructions and hardware for the installation.
( This kit does not come with the round adapter plug, part # WR29X10049 4 to 6 pin. It will need to be ordered separately. )
This WP2313637 Whirlpool ice cutter grid is located inside the main cabinet of the ice maker. If your Whirlpool ice maker is not making ice properly, the ice cutter grid may need to be replaced.
The cutter grid has fine wires that heat up and melt through the sheet of ice, making ice cubes, that then fall into the ice bin compartment. This WP2313637 ice cutting grid assembly is used on some Kenmore, Whirlpool, and KitchenAid under counter and free standing model ice makers.
This refrigerator water valve part WR57X10022 is used for some side by side GE refrigerators. This valve is also used on some Hotpoint refrigerators.
This WR57X10022 water valve is also known as the water inlet fill valve, water fill valve assembly, water solenoid and fill valve. It is also used on some Hotpoint side by side refrigerators. This valve assembly is used to supply water to the ice maker or water dispenser when activated.
Note: This WR57X10022 water valve assembly has been redesigned from the original valve but will still function and work the same. It comes with the newer push in quick connect fittings instead of threaded fittings.
This WP2313637 ice cutting grid is located inside the main cabinet of the ice maker. If your ice maker is not making ice properly, the ice cutting grid may need to be replaced.
The cutting grid has fine wires that heat up and melt through the sheet of ice, making ice cubes, that then fall into the ice bin. This WP2313637 ice cutting grid assembly is used on some Kenmore, Whirlpool, and KitchenAid under counter model ice machines.
This ice machine circulation pump part WP756782 is used for some stand alone KitchenAid ice machines. This pump is also used on some Kenmore and Kitchen Aid ice machines.
The old part number for this ice maker pump is 756782. This KitchenAid ice maker pump is also known as a water pump, ice machine water pump, water pump assembly and recirculating pump. It is also used on some Kenmore and Whirlpool free standing and under the counter ice machines. This pump helps circulate water through the evaporator which in turn forms an ice sheet that will then be cut into cubes from the ice cutting grid.
Genuine OEM part DA97-08223D ice bucket and auger assembly. This ice bucket assembly is used on some Samsung model refrigerators.
The ice bucket with auger assembly is located in the freezer section of your refrigerator, it is used to collect, store and dispense ice cubes.
No tools are needed for replacing this ice bucket assembly.