GE Refrigerator Ice Bucket Assembly WR17X23255

This ice bucket assembly with auger WR17X23255 is used on some GE refrigerators.  The ice bucket is used to catch, store and move the ice cubes forward.

 

The ice cubes are moved forward by the rotating auger located inside the ice bucket when the refrigerator ice

dispenser is pressed.  This GE ice bucket comes with a heavy duty plastic auger that will not rust like the metal augers can.

This genuine OEM GE part is also used on some Hotpoint refrigerators.

Whirlpool Ice Maker WPW10300022

This WPW10300022 is a genuine OEM Whirlpool replacement ice maker. The ice maker does not come with the wire harness or the ice lever arm, both of these components will need to be transferred and reused from your original ice maker.

 

This WPW10300022 replacement ice maker is also used on some Amana, Maytag and Ikea refrigerators.

Ice Machine Cutting Grid W10919199

This W10919199 ice cutting grid is located inside the main console of the ice machine.  If your ice machine is not making ice properly, the ice cutting grid may need to be replaced.

 

The cutting grid has fine wires that heat up and melt through the ice sheet making ice cubes that then fall into the ice bin.  This W10919199 ice cutting grid assembly is used on some Whirlpool, Jenn Air and KitchenAid free standing model ice machines.

GE Refrigerator Ice Maker Kit IM6D

This IM6D Ice maker kit will work on many GE built refrigerators.  The IM6D is a complete add on ice maker kit and can be used on many models of GE, Hotpoint manufactured refrigerators made from 1987 to the present.

 

This kit will work on GE refrigerator models that have a sticker of one of the following letters on the back side of the refrigerator:  LMQRSTUV or W.  This IM6D kit includes the icemaker, single valve-water valve, fill tubes, two ice buckets, installation instructions and hardware for the installation.

( This kit does not come with the round adapter plug, part # WR29X10049 4 to 6 pin.  It will need to be ordered separately. )

GE Ice Maker Kit WR30X10093

This WR30X10093 kit includes, the ice maker, 4 pin round plug in connector, 6 post plug in connector, fill cup and tube.  This GE ice maker has a 7 crescent ice mold tray.

 

If your GE ice maker is not functioning properly, it could be the water valve is defective or the freezer temperature is not cold enough.  The freezer temperature should be around 0 degrees Fahrenheit, for the icemaker to function properly and produce ice cubes.  This WR30X10093 ice maker kit is also used on some Hotpoint and RCA model refrigerators.

Ice Maker Level Control Board W10757851

The ice maker will stop producing ice if the ice level control board has failed.  These boards use an infrared beam to sense the ice level in the ice bin/bucket.

 

They send a signal for the ice maker to produce more ice.  If the ice level control board has failed or is faulty the ice maker will not produce ice.  The control boards tell the ice maker when it is full, when to dump the ice and when to fill with water.  These ice level control boards are used on some Whirlpool, Kenmore, Maytag and KitchenAid refrigerators.  The old part number is 4389102.

Top