Electric Oven Won't Broil

If your electric ovens not broiling, here you will find troubleshooting help with some of the most common solutions to repair your broken oven with.

WARNING – If you are attempting to repair any household appliances yourself, be aware that you are working with potentially dangerous electrical currents that can cause serious bodily injury or death.  Always remove the electrical power source from the appliance before you ever begin working on it.  Be aware that appliances have extremely sharp edges and moving parts that can cause serious bodily injury or death.  Be aware that there are many other dangers and precautions involved in appliance repair besides those listed above.  We strongly suggest that you please read our DISCLAIMER before any further actions are taken or proceeding any further.  Always think safety first!

Troubleshoot An Electric Oven That Won’t Broil With These 5 – Steps

Step-1. Broil Element

The broil element is located on the inside of the oven cavity at the top and is used for broiling.  Quite often the broiler element is used to help preheat an electric oven faster.  If your oven won’t broil you will need to visually inspect the broiling element for signs of damage, such as burn marks, bubbling or blistering, burnt or melted terminal ends or a broken spot in the element.  A broiler element can be tested for continuity using a digital or analog multimeter, If the test shows no continuity, the broil element will need to be replaced to fix the problem.  If the test shows the element has continuity, it is good and more troubleshooting will need to be performed.  Safety Note –Please keep in mind that just because a broiling element does not look hot, doesn’t mean that it isn’t hot, it can still burn you.  You will want to be sure to wear safety gloves while inspecting or troubleshooting any of your ovens parts.

Step-2. Temperature Sensor

The temperature sensor is used on newer model electronic control ovens, it is used to sense the temperature inside of the oven.  The sensor communicates with the ovens electronic control board, which adjusts the temperature as necessary.  On newer model ovens, a fault code should display on the control panel if the temperature sensor has failed.  You will need to refer to your owners manual, under oven fault codes to see if the temperature sensor is the problem.

Step-3. Relay Control Board

Some electric ovens have a relay control board that’s separate from the electronic control board. The relay control board has the electrical relay that controls the voltage going to the broiling element.  Inspect the relay control board. and replace it if you detect any burnt spots, melted relays or any other obvious signs of damage.

Step-4. Electronic Control Board

You will need to Inspect your ovens electronic control board, the control board is a very difficult part to test,  You can visually inspect the control board for a loose wire harness connection or a burnt or melted component on the control board.  If any of the mentioned damage is found, the control board may be faulty.  The control board is a very intricate electrical part, sometimes a hairline fracture in a solder spot can cause the board to fail, you won’t even be able to see the fracture in the solder with the naked eye.

Step-5. Blown Oven Fuse

On some oven models an internal fuse is used to shut the oven off to prevent any further damage to the appliance.  If the fuse has blown, the oven won’t turn on, the fuse can be tested using a multimeter, if the fuse does not have continuity, the part is faulty and will need to be replaced.  Before replacing the fuse with a new one, you will need to inspect or troubleshoot the various components within the oven to determine what caused the fuse to blow.  Visually inspect the internal oven components, look for burnt wires, burnt wire connectors, signs of damage on the bake and broil elements and the elements connections.

More Related Oven Symptoms

Search For Parts by Brand Name

Browse parts for major brands

Site Information

Home Page

About Us

Contact

 

Model Number Help 

Locating Your Model #

Terms & Conditions

DISCLAIMER

Shipping Information

Same Day Shipping

 

All of the parts on this site are authentic (OEM) Original Equipment Manufacturer replacement parts, unless otherwise noted in the detailed products description.

References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts  © 2021

Top