Electric Oven Won't Turn On

If your electric ovens not turning on, here you will find troubleshooting help with some of the most common solutions to repair your broken oven with.

WARNING – If you are attempting to repair any household appliances yourself, be aware that you are working with potentially dangerous electrical currents that can cause serious bodily injury or death.  Always remove the electrical power source from the appliance before you ever begin working on it.  Be aware that appliances have extremely sharp edges and moving parts that can cause serious bodily injury or death.  Be aware that there are many other dangers and precautions involved in appliance repair besides those listed above.  We strongly suggest that you please read our DISCLAIMER before any further actions are taken or proceeding any further.  Always think safety first!

Troubleshoot An Electric Oven That Won’t Turn On With These 7 – Steps

Step-1. Blown Oven Fuse

On some oven models an internal fuse is used to shut the oven off to prevent any further damage to the appliance.  If the fuse has blown, the oven won’t turn on, the fuse can be tested using a test meter meter, if the fuse does not have continuity, the part is faulty and will need to be replaced.  Repair Tip – Before replacing the fuse with a new one only to have it blow again, you will need to inspect or troubleshoot the various components within the oven to determine what caused the fuse to blow.  Visually inspect the internal oven components, look for burnt wires, burnt wire connectors, signs of damage on the heating elements and the elements connections.

Step-2. Incoming Electricity

First, you will need to check for a blown fuse or a tripped circuit breaker in your homes main circuit breaker box.  If a fuse has blown, replace the fuse with a new one, if you find that the circuit breaker has tripped, flip the breaker back to the on position.

Step-3. Broil Element

The broil element is located on the inside of the oven cavity at the top and is used for broiling.  Quite often the broiler element is used to help preheat an electric oven faster.  If your element has stopped working you will need to visually inspect it for signs of damage, such as burn marks, bubbling or blistering, burnt or melted terminal ends or a broken spot in the element.  A broiling element can be tested for continuity using a digital or analog multimeter, If the test shows no continuity, the broil element will need to be replaced to fix the problem.  If the test shows the element has continuity, it is good and more troubleshooting will need to be performed.  Safety Note –Please keep in mind that just because a broiling element does not look hot, doesn’t mean that it isn’t hot, it can still burn you.  You will want to be sure to wear safety gloves while inspecting or troubleshooting any of your ovens parts.

Step-4. Bake Element

The bake element is located on the bottom part of the interior cavity on free standing and wall ovens.. If you have noticed that your electric oven is not heating while you are trying to bake, the baking element may have burned out.  You can test the element for continuity using a digital meter or multimeter.  If the test shows no continuity, the baking element will need to be replaced to fix the problem, if the element has continuity it is good and more troubleshooting will need to be performed.  Safety Reminder – Please be sure that your oven has had plenty of time to cool down before testing or removing any internal or external parts.  Some oven parts can hold heat for quite sometime and will still burn you long after the unit has been turned off.

Step-5. Temperature Sensor

The temperature sensor is used on newer model electronic control ovens, it is used to sense the temperature inside of the oven.  The sensor communicates with the ovens electronic control board, which adjusts the temperature as necessary.  On newer model ovens, a fault code should display on the control panel if the temperature sensor has failed.  You will need to refer to your owners manual, under oven fault codes.

Step-6. Surface Heating Element

The surface heating element is used on the cooktop surface of some electric free standing and slide-in oven models.  If your surface element is not heating you can test the part for continuity with a multimeter.  If the element has continuity it is good, if the test shows no continuity, the element is bad, the solution is to replace the broken surface element to fix the problem.  Troubleshooting tip – If you don’t have a test meter, a digital meter can be purchased reasonably cheap online or from one of the bigger hardware stores, a test meter is a real time and money saver while troubleshooting the various electrical parts on an oven.  Electrical parts can be diagnosed either good or bad quickly, instead of assuming that a part is faulty and replacing it, only to find out that part wasn’t bad and the problem lies elsewhere with another broken oven part.

Step-7. Electronic Control Board

Inspect the ovens control board, the control board is a difficult part to test,  You can look for a loose wire harness connection or a burnt or melted component on the control board.  If any of the mentioned damage is found, the control board may be faulty.

More Related Oven Symptoms

Search For Parts by Brand Name

Browse parts for major brands

Site Information

Home Page

About Us

Contact

 

Model Number Help 

Locating Your Model #

Terms & Conditions

DISCLAIMER

Shipping Information

Same Day Shipping

 

All of the parts on this site are authentic (OEM) Original Equipment Manufacturer replacement parts, unless otherwise noted in the detailed products description.

References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts  © 2021

Top