Electric Stove Won't Broil

If your electric stoves not broiling, here you will find troubleshooting help with some of the most common solutions to repair your broken stove with.

WARNING – If you are attempting to repair any household appliances yourself, be aware that you are working with potentially dangerous electrical currents that can cause serious bodily injury or death.  Always remove the electrical power source from the appliance before you ever begin working on it.  Be aware that appliances have extremely sharp edges and moving parts that can cause serious bodily injury or death.  Be aware that there are many other dangers and precautions involved in appliance repair besides those listed above.  We strongly suggest that you please read our DISCLAIMER before any further actions are taken or proceeding any further.  Always think safety first!

Troubleshoot An Electric Stove That Won’t Broil With These 5 – Steps

Step-1. Broil Element

The broil element is located on the inside of the stove’s oven cavity at the top and is used to broil with.  Quite often the broil element is used to help preheat an electric oven faster.  If your element has stopped working you will need to visually inspect it for signs of damage, such as burn marks, bubbling or blistering, burnt or melted terminal ends or a broken spot in the element.  A broil element can be tested for continuity using a digital or analog test meter, If the test shows no continuity, the broiler element will need to be replaced to fix the problem.  If the test shows the element has continuity, it is good and more troubleshooting will need to be performed on the stove.  Safety Reminder  Please keep in mind that just because a broiler element does not look red hot, doesn’t mean that it isn’t hot, it can still burn you.  You will want to be sure to wear safety gloves while inspecting or troubleshooting any of your ovens parts to protect your hands from being harmed.

Step-2. Temperature Sensor

The temperature sensor is used on newer model electronic control stoves, it is used to sense the temperature inside of the oven compartment.  The sensor communicates with the stoves electronic control board, which adjusts the temperature as necessary.  On newer model stoves, a fault code should display on the control panel if the temperature sensor has failed.  You will need to refer to the owners manual, under the stoves fault codes to see if the temperature sensor is the problem.

Step-3. Relay Control Board

Some electric stoves have a relay control board that’s separate from the electronic control board. The relay control board has the electrical relay that controls the voltage going to the heating elements.  Inspect the relay control board. and replace it if you detect any burnt spots, melted relays or any other obvious signs of damage.

Step-4. Electronic Control Board

You will need to Inspect your stoves electronic control board, the control board is a very difficult part to test,  You can visually inspect the control board for a loose wire harness connection or a burnt or melted component on the control board.  If any of the mentioned damage is found, the control board may be faulty.  The control board is a very intricate electrical part, sometimes a hairline fracture in a solder spot can cause the board to fail, you won’t even be able to see the fracture in the solder without using a magnifying glass.

Step-5. Blown Stove Fuse

On most newer model stoves an internal fuse is used to shut the stove off to prevent any further damage to the appliance.  If the fuse has blown, the stove will not turn on, the fuse should be tested using a test meter, if the fuse does not have continuity, the part is faulty and will need to be replaced.  Troubleshooting repair tip – If you do not have access to a test meter, a digital meter can be purchased reasonably cheap online or from one of your local hardware stores, a test meter is a real time and money saver while troubleshooting the various electrical parts on a stove.  Electrical parts can be diagnosed either good or bad instantly, instead of just assuming that an electrical part might be faulty and replacing it, only to find out after installing the part that it wasn’t bad after all, the problem is with another broken stove part.  Before replacing the fuse with a new one, you will need to inspect or troubleshoot the various components on your stove to determine what caused the fuse to burn out.  Visually inspect the internal and external stove components, you should look for burnt wire connectors, burnt wires, damage on the bake, broil and surface elements as well as the elements terminal connections.

More Related Stove Symptoms

Search For Parts by Brand Name

Browse parts for major brands

Site Information

Home Page

About Us

Contact

 

Model Number Help 

Locating Your Model #

Terms & Conditions

DISCLAIMER

Shipping Information

Same Day Shipping

 

All of the parts on this site are authentic (OEM) Original Equipment Manufacturer replacement parts, unless otherwise noted in the detailed products description.

References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts  © 2021

Top