GE Oven Parts

View GE Oven Replacement Parts Category

GE Oven Temperature Sensor

Parts Number – WB21X5301

This temperature sensor is located on the top back wall of the oven.  The sensor is used to regulate and measure the temperature inside of the oven.  If you have noticed that your GE oven temperature is inaccurate or fluctuates by 50 degrees or more, the sensor is more than likely defective and should be replaced.  Be sure to use your model number to be certain that this is the correct part for your particular oven.   Always unplug or disconnect the electrical power source to the appliance before attempting to repair it.

GE Oven Temperature Control Thermostat

Parts Number – WB20K8

This thermostat control is used to establish and maintain the temperature inside the oven.  Please remember to disconnect the electrical power source to the oven before making any repair procedures or replacing any parts on your appliance.

GE Oven Broil Element

Parts Number – WB44K10002

This broil element is located in top of the oven cavity and is used for broiling.  Quite often the element is used to help preheat an electric oven faster.  If your element has stopped working you will need to check for visual damage to it, such as burn marks, bubbling or blistering, burnt or melted terminal ends. This element can be tested for continuity using a digital or analog multimeter.  Remember to unplug or disconnect the electrical power source to the appliance before attempting to repair it.  Safety note: Please keep in mind that just because a broiling element does not look hot, doesn’t mean that it isn’t hot, it can still burn you.  You will want to be sure to wear safety gloves while inspecting and troubleshooting any parts of your oven.  Work safe!

GE Oven Igniter

Parts Number – WB16K10035

This burner igniter does not come with the wire nuts.  Note:  The igniter connector may need to be cut off and spliced directly to the oven wires using porcelain wire nuts to secure the wires with.  To ensure that this is the correct part for your particular GE oven, we suggest using the model number on your appliance.  Please remember to disconnect the electricity to the unit before making this repair.

GE Oven Broil Element

Parts Number – WB44K5009

This broil element is located inside the top part of the oven and is used for broiling food with.  The broil element is often used to help preheat the oven for a much faster cooking time.  If your element is bad, you should be able to see some kind of visual damage, such as blistering, burnt marks, bubbles or melted terminal ends.  The element can be tested for continuity by using either an analog or digital multimeter.  If your element does not show that it has continuity it is bad and it will need to be replaced with a new one.  When ordering this part, please use your model number to ensure that this is the correct part for your specific appliance model.

GE Oven Bake Element

Parts Number – WB44X5043

This bake element uses screws to connect the terminal ends to the oven terminal.  The element is mounted in the bottom part of the oven cavity and used to bake with.   Always unplug or disconnect the electrical power source to an appliance before attempting to repair it.

GE Oven Control Board

Parts Number – WB27K10355

Gas oven electronic control board.

GE Oven Glow bar Igniter

Parts Number – WB13X25261

This igniter/glow bar is used in the oven to ignite the gas to broil.

GE Gas Oven Valve Pressure Regulator

Parts Number – WB19K10044

This part is a safety valve used on the gas oven.  The valve is used to prevent gas from leaking until the oven igniter gets hot enough to ignite the gas.  The pressure regulator automatically cuts the flow of gas off when a certain pressure is reached.  Please be sure to turn the gas off and disconnect the electricity to your appliance before installing this part.

GE Oven Bake Element

Parts Number – WB44K5012

This bake element is located on the bottom part of the oven. If you have noticed that your electric GE oven is not heating while you are trying to bake, the heating element may have burned out.  You can test the element for continuity using a multimeter.  If the element has continuity you will need to test the element switch and the element terminal.  Please remember to always disconnect your appliance from its electrical source before doing any repair procedures on it.  Safety reminder: Please be sure that your oven has had plenty of time to cool down before testing or removing any internal or external parts.  Some parts of an oven can hold residual heat for quite some time and will still burn you long after your appliance has been turned off.

Why choose genuine GE parts? If your oven says GE on the outside why not put GE replacement parts on the inside.  Your GE oven was designed for maximum performance, reliability and efficiency.  To keep your oven working like new, always use genuine Original Equipment Manufactured parts to repair and maintain it with.

Appliance Category

Browse parts for major brands

Site Information

Home Page

About Us

Contact

 

Model Number Help 

Locating Your Model #

Terms & Conditions

DISCLAIMER

Shipping Information

Same Day Shipping

 

References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts  © 2021

Top