GE Range Parts

View Parts For GE Brand Ranges

GE Range Bake Element

Parts Number – WB44X5043

This replacement part is used on many GE brand electric ranges. This bake element uses (2) screws to connect the terminal end parts to the range’s terminal. The element is mounted inside on the bottom part of the interior cavity and is used for baking with. Please unplug or disconnect the electrical power source to the appliance before attempting to remove or replace any parts.

GE Gas Range Valve Pressure Regulator

Part Number – WB19K10044

This part is a safety valve used on some GE gas range models. The valve is used to prevent gas from leaking until the igniter gets hot enough to light the gas to flame. The pressure regulator automatically cuts the flow of gas off when a certain pressure is reached. Please be sure to turn the gas off and disconnect the electricity to your range before you begin this repair.

GE Range Bake Burner and Igniter

Part Number – WB16K10035

This OEM bake burner and igniter part kit does not come with the wire nuts. Note: The igniter connector may need to be cut off and spliced directly to the range wires using porcelain wire nuts to secure the wires with. To ensure that these are the correct parts for your specific GE gas range, we suggest using the model number on your appliance. Please remember to disconnect the electricity to the range before making this repair.

GE Range Broil Element

Part Number – WB44K10002

This broil element is located in the top of the oven’s cavity and is used for broiling with. Quite often the broil element is used to help preheat the oven compartment inside of a GE electric range faster. If your broiler element has stopped heating you will need to check for visual damage such as, burn marks, bubbling or blistering, burnt or melted terminal ends. This element can be tested for continuity with a multimeter. You will want to be sure and use your ranges model number to ensure that this is the correct replacement part for your specific appliance.

GE Range Temperature Control Thermostat

Part Number – WB20K8

This thermostat control is used to establish and maintain the temperature inside the oven. Please remember to disconnect the electrical power source to your range before making any repair procedures to your appliance.

GE Range Temperature Sensor

Part Number – WB21X5301

This temperature sensor is located on the top back wall of the oven. The sensor is used to regulate and measure the temperature in the oven. If you have noticed your oven temperature is inaccurate or fluctuates by 50 degrees or more, the sensor is more than likely defective and should be replaced. Be sure to use your model number to be certain that this is the correct replacement for your specific GE brand range. Please remember to unplug or disconnect the electrical power source to your appliance before attempting to repair it.

GE Range Bake Element

Part Number – WB44K5012

This bake element is located on the bottom part of the oven in some ranges. If you have noticed that your GE electric range is not heating while trying to bake, the heating element may have burned out and will need to be replaced if so. Please remember to always disconnect your appliance from its electrical source before attempting to repair it. Safety note: Please be mindful that a baking element can burn your hands, just because the element is not glowing red hot, doesn’t mean that it is not hot and cannot still burn you. You will want to be sure to wear safety gloves while removing or troubleshooting any parts on your range. Always work safe!

GE Range Control Board

Part Number – WB27K10355

Gas range electronic control board.

GE Range Broil Element

Part Number – WB44K5009

This broil element is used in the top of the oven on some electric range models. The element has (2) push on spade terminals and is 240 volts. We suggest using your model number to be sure this is the correct part for your electric range. Please don’t forget to unplug or disconnect the electrical power source to the appliance before attempting to replace this heating element.

GE Gas Range Glow Bar Igniter

Parts Number – WB13X25261

This igniter-glow bar is used in the oven compartment on a gas range to ignite the gas to the broiler.

Why choose GE OEM parts? If your range says GE on the outside why not put genuine GE replacement parts on the inside. Your GE range was designed for maximum performance, reliability and efficiency. To keep your gas or electric range working like new, always use authentic Original Equipment Manufactured parts to repair and maintain it with.