GE Stove Parts

View GE Stove Replacement Parts Category

GE Gas Stove Valve Pressure Regulator

Parts Number – WB19K10044

This part is a safety valve used on a gas stove.  The valve is used to prevent gas from leaking until the oven igniter gets hot enough to ignite the gas.  The pressure regulator automatically cuts the flow of gas off when a certain pressure is reached.  You will need to be sure to turn the gas off and disconnect the electricity to your stove before installing this part.

GE Stove Broil Element

Parts Number – WB44K10002

This broil element is located in top of the oven cavity and is used for broiling with.  Quite often the broil element is used to help preheat the oven inside of an electric stove quicker.  If your stoves broil element has stopped heating you will need to check for visual signs of damage such as, burn marks, bubbling or blistering, burnt or melted terminal ends or a broken element.  Your element can be tested for continuity using a multimeter.  You will want to be sure and use your stoves model number to ensure that this is the correct part for your specific appliance.  Safety reminder: We suggest that you wear safety gloves while troubleshooting or testing any of your stove element parts.  just because an element is not glowing red hot, doesn’t mean that it is not hot, it can still burn you long after you have shut the stove off.

GE Stove Temperature Sensor

Parts Number – WB21X5301

This temperature sensor is located on the top back wall inside of the oven compartment.  The sensor is used to regulate and measure the temperature inside of the stove.  If you have noticed your stoves temperature is inaccurate or fluctuates by 50 degrees or more, the sensor is more than likely defective and should be replaced.  Be sure to use your model number to be certain that this is the correct part for your specific appliance.

GE Stove Temperature Control Thermostat

Parts Number – WB20K8

This thermostat control is used to establish and maintain the temperature inside of the oven.  Please remember to disconnect the electrical power source to your stove before making any repair procedures to your appliance.

GE Stove Control Board

Parts Number – WB27K10355

Gas stove electronic control board.

GE Stove Bake Element

Parts Number – WB44K5012

This bake element is located on the bottom part of the oven compartment in some GE stove models.  If you have noticed that your electric stove is not heating while you are trying to bake, the heating element may have burned out and will need to be replaced if so.  Please remember to always disconnect your stove from its electrical source before attempting to repair it.

GE Gas Stove Glow Bar Igniter

Parts Number – WB13X25261

This igniter-glow bar is used in the oven compartment on some gas stoves to ignite the gas to flame for the broiler.

GE Stove Bake Element

Parts Number – WB44X5043

This bake element uses screws to connect the terminal end parts to the terminal block.  The element is mounted in the bottom part of the ovens cavity and is used to bake with.   Please disconnect the electricity to the appliance before you ever begin to repair it. Safety note: Please be certain that your stove has had plenty of time to cool down before removing, troubleshooting or testing any parts on your stove.  Some stove parts can retain their heat for quite some time and will still burn you long after you have turned your stove off.  Be safe!

GE Gas Stove Igniter

Parts Number – WB16K10035

This stove burner igniter does not come with the wire nuts.  Note: The igniter connector may need to be cut off and spliced directly to the stove’s wires, using porcelain wire nuts to secure the wires with.  To ensure that this is the correct part for your gas stove, we suggest using the model number on your appliance.  Please don’t forget to disconnect the electricity to the unit before replacing this part.

GE Electric Stove Broil Element

Parts Number – WB44K5009

This broil element is used in the top part of the oven compartment on some electric stove models.  The element has (2) push on spade terminals, and it is 240 volts.  Please don’t forget to disconnect the electricity to the appliance before you begin this stove repair.

Why choose genuine GE parts? If your stove says GE on the outside why not put GE replacement parts on the inside.  Your GE stove was designed for maximum performance, reliability and efficiency.  To keep your stove working like new, always use genuine Original Equipment Manufactured parts to repair and maintain it with.

Appliance Category

Browse parts for major brands

Site Information

Home Page

About Us

Contact

 

Model Number Help 

Locating Your Model #

Terms & Conditions

DISCLAIMER

Shipping Information

Same Day Shipping

 

References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts  © 2021

Top