Shop a wide selection of OEM appliance parts for major brands.  Click on the model you are repairing below to find the replacement parts you need.
Need Repair Help?

Get free troubleshooting advice and tips to help you fix all of your major household gas and electric appliances.  Click the repair help and troubleshooting button below to find the model you are working on.
All of the parts on this site are genuine OEM appliance replacement parts to repair these major appliance brands, Whirlpool, Kenmore, GE, Maytag, LG, Samsung, Hotpoint, Bosch, Amana, Roper, Jenn-Air, Admiral, Electrolux, Frigidaire, appliances, unless otherwise noted in the part description.  When purchasing a new OEM replacement bake element, ice maker, dishrack, pump, ignitor or control board to repair your oven, refrigerator, stove, dishwasher, range, dryer or washer with, you the customer can rest assured that the replacement part(s) you have purchased will be made of quality, durable and long-lasting materials that have been vigorously tested by the manufacturer and will always be an easy, exact, original equipment replacement fit for your specific model or brand of gas or electric appliance.

Get help locating the model number

Here are a few common appliance problems that can be a cheap easy repair and may not require any new replacement parts.

Electric Dryer Won’t Heat

The first thing to troubleshoot if your electric dryer won’t heat is the dryers 220 circuit breaker located in the main circuit breaker box.  You will need to locate the breaker box and find the 220 breaker that is dedicated for your clothes dryer.  Flip the breaker off and on a few times, even if it looks like the breaker is already in the on position.  The electric clothes dryer runs on 220 and if half of the two pole breaker is tripped…. Read More

Refrigerator Is Warm

The condenser coils are located under the refrigerator, behind the kickplate/grill at the very bottom of the fridge.  If the condenser coils become clogged with dust and pet hair etcetera, there won’t be sufficient air flow being moved by the condenser fan across the coils.  If the coils can’t release the heat, the refrigerator will strain to stay cool You can remove the kickplate from the bottom of the refrigerator and clean it if…. Read More

Dishwasher Won’t Drain

Troubleshooting the dishwashers filter, some models have a self cleaning filter, if yours does not and the filter is dirty and clogged with food debris, this is more than likely the problem and why your dishwasher won’t drain the water from the tub.  Give the filter a good cleaning and try to drain the water out, Helpful Tip – cleaning the filter should be regular maintenance for optimum dishwasher performance…. Read More

Washer Won’t Fill

If your washer won’t fill with water, check the water inlet valve strainer screens for blockage.  Repair tip – you must turn both the hot and cold water valves off at the wall that lead to the back of the washer before doing this.  Check the hose washer screens inside the ends of each hose if any are present, as well as the screens inside of the water inlet valve If any blockage or debris is present, carefully clean the debris out with…. Read More

What to do if your electric oven has blown a fuse

First you will need to make sure and disconnect the electricity to the appliance.  On some oven models an internal fuse is used to shut the oven off to prevent any further damage to the appliance.  If the fuse has blown, the oven won’t turn on.  The fuse can be tested using a test meter, if the fuse does not have continuity, the part is faulty and will need to be replaced.  Service tip, before replacing the fuse with a new one only to have it blow again, you will need to inspect or troubleshoot the various parts within the oven to determine what caused the fuse to blow in the first place.  Visually inspect the internal oven components, look for burnt wires, burnt wire connectors, signs of damage on the heating elements and the elements connections and repair the damage if any is found.

Try this if a surface burner on your gas range won’t light

A rapid continuous clicking sound from the spark igniter will occur if the burner ports on your gas ranges cooktop are clogged.  If the burner ports are clogged this may prevent the gas burner from lighting and the spark ignitor may continue clicking.   Here’s a tip – If this is the problem that you are having with your cooktop burner, you can try cleaning out the debris and buildup from the burners ports using a fine metal pin or a small diameter piece of wire.  If liquids have entered into the burner ports from cooking spills the ranges surface burners may not ignite.  First you will need to make sure that you turn off the gas supply to the appliance, then using a hairdryer, set on the cool cycle, you can dry the burners out so they will be able to function properly again.

Site Information

Home Page

About Us

Contact

 

Model Number Help 

Locating Your Model #

Terms & Conditions

DISCLAIMER

Shipping Information

Same Day Shipping

 

References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts © 2022

Top