Hotpoint Range Parts

Need help finding the model number on your range?

View Parts For Hotpoint Brand Ranges

Hotpoint Range Bake Burner and Igniter

Parts Number – WB16K10035

This is a genuine OEM bake burner and igniter replacement kit used on some Hotpoint gas ranges, the parts kit does not come with the wire nuts. Note: The igniter connector may need to be cut off and spliced directly to the range wires using porcelain wire nuts to secure the wires with. To ensure that these are the correct replacement parts for your specific gas range, we suggest using the model number on your appliance. Please remember to disconnect the electricity to the unit before making this repair.

Hotpoint Range Temperature Sensor

Part Number – WB21X5301

This temperature sensor is located on the top back wall inside of the oven. The sensor is used to regulate and measure the temperature inside of the oven. If you have noticed that your ovens temperature is inaccurate or fluctuates by 50 degrees or more, the sensor is more than likely defective and should be replaced. Be sure to use your model number to be certain that this is the correct part for your specific range. Please don’t forget to unplug or disconnect the electrical power source to your appliance before attempting to repair it.

Hotpoint Range Bake Element

Part Number – WB44K5012

This bake element is located inside the bottom of the oven compartment in some electric range models. If you have noticed that your oven is not heating while trying to bake, the heating element may have burned out. Please remember to always disconnect your appliance unit from it’s electrical power source before attempting to repair it. Safety reminder: Please be sure that your range has had plenty of time to cool down before removing, testing or troubleshooting any parts. Some range parts can retain their heat for quite sometime and can still burn you long after you have turned your range off. Be safe!

Hotpoint Range Broil Element

Part Number – WB44K10002

This broil element is located in top of the oven cavity and is used for broiling. Quite often the element is used to help preheat the oven on an electric range faster. If your broiler element has stopped heating you will need to check it for visual damage such as, burn marks, bubbling or blistering, burnt or melted terminal ends. The element can be tested for continuity with a multi-meter. Always unplug or disconnect the electricity to your range before you begin any repairs.

Hotpoint Range Control Board

Part Number – WB27K10355

Gas Range electronic control board.

Hotpoint Range Broil Element

Part Number – WB44K5009

This broil element is used in the top of the oven. The element has (2) push on spade terminals and is 240V. We suggest using your model number to be sure that this is the correct part for your electric range. Remember to unplug or disconnect the electrical power source to the appliance before attempting to repair it.

Hotpoint Range Temperature Control Thermostat

Part Number – WB20K8

This thermostat control is used to establish and maintain the temperature inside of the oven. Please remember to disconnect the electrical power source to the range before making any repair procedures to your appliance.

Hotpoint Gas Range Valve Pressure Regulator

Part Number – WB19K10044

This part is a safety valve used on some gas range models. The valve is used to prevent gas from leaking until the oven igniter gets hot enough to ignite the gas to a flame. The pressure regulator automatically cuts the flow of gas off when a certain amount of pressure is reached. Please be sure to turn the gas off and disconnect the electricity to your range before installing this part.

Hotpoint Range Bake Element

Part Number – WB44X5043

This bake element uses screws to connect the two terminal ends to the oven terminal. The element is mounted inside the bottom of the oven cavity of the range and used for baking. Don’t forget to unplug or disconnect the electricity to your range before attempting to replace this part.