Jenn Air Range Parts

Jenn Air Range Surface Element 8″

Parts Number – WP660533

This range surface element part is used to repair the cooktop surface on many Jenn Air electric ranges.  This OEM replacement element is 2600 watts and measures 8 inches in diameter.  It has a (5) turn element coil and rolled terminal ends.  If your range has a surface element that is not heating, you can test the part for continuity with a multi-meter.  If the element has continuity you will need to test the element switch and the terminal block.  Remember to always unplug or disconnect the electricity to your appliance before attempting to repair it.  Safety note:  Please keep in mind that a surface element can burn your hands, just because an element doesn’t look hot, does not mean that it is not hot, it can still burn you.  We suggest that you wear gloves when removing or testing any of your range’s heating elements.

Jenn Air Gas Range Surface Burner Head – Grey

Part Number – WP3412D024-26

Range gas burner head.  This part is located on the range’s cooktop surface, it is grey in color and comes with a spark electrode.  You will need to rotate or turn your old burner head counterclockwise an eighth of a turn to remove the part from the range cooktop.  The manufacturer has updated this burner head and it no longer requires a gasket.  Reasons for replacing this part are, the burner won’t light, enamel finish has cracked or worn off from use.  Be sure and enter the model number to be certain that this is the correct part for your particular appliance.

Jenn Air Range Surface Element Kit

Part Number – 4392061

Electric range surface element parts kit, used on the cooktop surface of many different freestanding electric ranges.  The OEM kit includes (2) 8″ coil elements, (2) 6″ coil elements, (4) element receptacles, wires, wire nuts and installation instructions.  If you have noticed one or more of your Range’s coil elements will not heat up, this genuine replacement parts kit should repair the problem.  Please always remember to unplug or disconnect the electricity dedicated to your range before you begin to repair it.  Note: Please be sure to give your range plenty of time to cool down before removing or replacing any parts.  Some range parts can hold residual heat for quite some time and will still burn you long after you have turned your oven off.  Please be safe!

Jenn Air Range Thermal Fuse

Part Number – WP3196548

The thermal fuse is used as a safety device when the range overheats.  This part will shut the range off to prevent a fire or further damage to the appliance.  Please remember to disconnect the electrical power source to your appliance before you replace this part.

Jenn Air Range Temperature Sensor

Part Number – 12001656

The temperature sensor is located inside the oven compartment in your range.  This part is used to measure and regulate the internal temperature inside of the oven’s cavity.  This OEM replacement sensor is approximately 6″ long and comes with (2) wire harness adaptors and installation instructions.  Always unplug or disconnect the electrical power source to the appliance before attempting to repair it.

Jenn Air Electric Range 6″ Surface Burner

Part Number – WP660532

This is a genuine OEM small range surface burner.  The part is used on the cooktop surface of many electric ranges.  If your surface element is not heating the part can be tested for continuity using a multi-meter.  Please enter your model number to make sure this is the correct part for your particular range.

Touch up Paint – White

Part Number – 72017

White touch up paint.  The paint can be used on the exterior of your range.  If your range has unsightly chips and scratches this touch up paint will repair the damaged areas.  The paint is white in color and comes in a (6) fluid ounce bottle with a brush for an easy touch up application.

Jenn Air Gas Range Surface Burner Head – Black

Part Number – WP3412D024-09

This part is used for cooking with on the cooktop surface of some gas range models.  It is black in color and comes with an electric spark electrode.  You will need to rotate / turn your burner counterclockwise an eighth of a turn to remove the burner head from the cooktop to replace it.  The manufacturer has updated the burner head and it no longer requires a gasket / seal.  Reasons for replacing this part are, burner will not light, or the enamel finish is cracked or worn off from use.  Please be sure and enter your model number to make sure that this is the correct replacement part for your specific range.

Jenn Air Range Igniter

Part Number – WP7432P143-60

Range Bake / Broil igniter.  This replacement part is used to ignite the gas for the range’s oven burner.  If your gas oven will not turn on or has little to no heat this part will need to be visually inspected or tested and should be replaced, if needed.  Note: Please be sure to match the connector with the old part. Always unplug or disconnect the electrical power source to the appliance before attempting to repair it.

Jenn Air Electric Range Radiant Surface Element 1200W

Part Number – WP8273994

The radiant surface element is used on some electric range models.  When ordering this part, please enter your model number to be certain it is the correct OEM part for your particular model range.

Range Parts

Jenn Air Parts