Jenn Air Stove Parts

View Jenn Air Stove Parts Category

Jenn Air Stove Surface Element Kit

Part Number – 4392061

This surface element kit is used on many different electric stove models.  The element replacement parts kit includes (2) 8″ coil elements, (2) 6″ coil elements, (4) element receptacles, wires, wire nuts and installation instructions.  If you have noticed one or more of your stoves coil elements will no longer heat, these parts should repair your stove,  Please remember to unplug or disconnect the power source to your appliance before you begin any repair or replace any parts.

Jenn Air Stove Surface Burner Head – Grey

Part Number – WP3412D024-26

This burner head is located on the cooktop surface of some gas stove models.  It is grey in color and comes equipped with a built in spark electrode.  You will need to rotate or turn the burner head counter clock wise one eighth of a turn to remove it from the stove cook top.  Note: The manufacturer has updated this burner head and it no longer requires a gasket to seal it.  Some reasons for replacing this part are: the burner won’t light, enamel finish has cracked or worn off from use or it has an uneven flame.  Please be sure to enter your stoves model number to be certain that this is the correct part for your specific appliance.

Jenn Air Stove Thermal Fuse

Part Number – WP3196548

This thermal fuse is used as a safety device in the case of a stove overheating.  This fuse will shut the stove off to prevent a fire or further damage from happening to the appliance.  If you have noticed that your oven will not come on, you will need to check the thermal fuse for continuity.  You can test it by using an analog or digital multi meter, if the fuse does not show continuity it will need to be replaced.  Please remember to disconnect the electrical power source to your stove before attempting to repair or replace any parts on it.

Jenn Air Stove Surface Burner 8″

Part Number – WP660533

This surface coil burner is located on the cook top surface of an electric stove.  The surface burner is 2600 watts and it measures 8 inches in diameter.  It has a (5) turn heating coil with rolled terminal ends, that push in and pull out of the receptacles on the stove.  If your surface element is not heating you can test the part for continuity with a multi-meter.  If the element shows that it has continuity you will need to test the surface element switch and the stove element receptacle.  Please unplug or disconnect the electricity to your appliance before you begin this repair.

Jenn Air Stove Temperature Sensor

Part Number – 12001656

This temperature sensor is located inside the oven compartment on some stove models.  The temperature sensor is used to measure and regulate the internal temperature inside of the oven cavity.  This sensor is approximately 6″ long and comes with (2) wire harness adaptors and installation instructions.  To be certain that this is the correct part for your specific stove, we suggest using the model number when ordering this part.

Jenn Air Stove Surface Burner 6″

Part Number – WP660532

This surface burner is used on an electric stoves cooktop surface.  If your stove has a surface burner that is not heating, the burner element should be tested to see if it has continuity by using a multi-meter.  please don’t forget to disconnect the electricity to your stove before making this repair.

Jenn Air Stove Surface Burner Head – Black

Part Number – WP3412D024-09

This burner head is located on the surface of some gas range models.  It is black in color and comes with a spark electrode.  You will need to rotate or turn the burner counter clock wise one eighth of a turn to remove the burner head unit from the cooktop surface.  The manufacturer has updated the burner head and it no longer requires a gasket / seal.  Reasons for replacing this part are: burner will not light or the enamel finish is cracked or has worn off from heavy use.  Safety reminder: Please give your stove plenty of time to cool down before troubleshooting or removing any it’s internal or external parts.  Some stove parts will hold heat for quite sometime and can still burn you long after you have turned the stove off.

Touch up Paint – White

Part Number – 72017

This touch up paint can be used on the exterior of your white stove.  If your stove has unsightly chips and scratches this touch up paint will fix the damaged areas.  The paint is white in color and comes in a (6) fluid ounce bottle with a brush for an easy touch up application.

Jenn Air Stove Radiant Surface Element 1200W

Part Number – WP8273994

This radiant heating element is used on the cooktop surface of some electric stove models.  When ordering this part please be sure to enter your model number to be certain that it is the correct part for your particular model of stove.

Jenn Air Stove Igniter

Part Number – WP7432P143-60

Bake / Broil igniter is used to ignite the gas to the oven burner.  If your gas oven will not turn on or has little to no heat, the igniter will need to be visually inspected for a broken element or tested for continuity and should be replaced, if needed.  Note: Please be sure to match the connector end with your igniter connector end.  Please remember to unplug or disconnect the electrical power source to your appliance before you begin this repair.

Appliance Category

Browse parts for major brands

Site Information

Home Page

About Us

Contact

 

Model Number Help 

Locating Your Model #

Terms & Conditions

DISCLAIMER

Shipping Information

Same Day Shipping

 

All of the parts on this site are authentic (OEM) Original Equipment Manufacturer replacement parts, unless otherwise noted in the detailed products description.

References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts  © 2021

Top