Common range parts that will need to be replaced
Part Number – WPW10345407
This is a small surface element, it measures 6 inches in diameter and is used on the cooktop surface of an electric range for cooking. It is a three-turn coil element with rolled terminal ends to push in or pull out of the range’s receptacle. Please remember to always unplug or disconnect the electricity to your range before the removal or replacement of any electrical parts. Note: Please keep in mind that a surface element can burn your hands, just because an element is not glowing red hot, does not mean that it is not hot and cannot still burn you. We suggest that you wear safety gloves when removing or troubleshooting any heating elements on your range.
Part Number – WPW10293048
This gas valve is used on a gas range to sense a desired amount of heat.
Once it has sensed the desired amount of heat it will open the valve to
let the gas flow to the range burner where it will then be ignited into
flame and used to heat the oven. Please remember to disconnect the
electrical power source to the appliance before attempting to repair it.
Part Number – 72017
This touch-up paint can be used on the exterior of your white range. If the metal cabinet of your gas or electric range has unsightly chips or scratches, this touch-up paint will help repair the damaged areas. The paint is white in color and comes in a 6 fluid ounce bottle with a brush for an easy touch-up application on most major house hold white appliances.
Part Number – WP3412D024-09
This burner head is located on the surface of a gas range. It is black in color and comes with a built-in spark electrode. You will need to rotate / turn the burner head counter clockwise an eighth of a turn to remove the burner unit from your cooktop. The manufacturer has updated the burner head and it no longer requires a gasket / seal. Some of the reasons for replacing this part are, the spark electrode is weak or broken, only lights sometimes, has an uneven flame or the black enamel finish is cracked or worn off from extended use. Please be sure and enter your model number to be certain that this is the correct part for your specific gas range model.
Part Number – AGM73689604
This parts kit included (5) range knobs used for some stainless- steel ranges. Reasons for replacing these parts are, the range knobs are broken and will no longer control the selected burner. Note: Please compare the knobs with your range knobs before ordering. These knobs only fit on a (D) shaped shaft. Some knobs may look identical to these, but they will not fit or function properly on your specific range model.
Part Number – WPW10308477
This bake element is located inside the bottom part of the oven compartment in an electric range. The bake element has (2) flat push-on terminals. Some common symptoms of a bad bake element are, the element will not heat, trips the circuit breakers when turned on or blows a fuse. Remember to always disconnect the electrical power source to the range before you begin to repair it. Turn the breaker dedicated to the range off or pull the fuses. Be safe! Please be sure to enter your model number to ensure that this is the correct part for your particular electric range model.
Part Number – 5300W1R005A
This radiant heating element is located beneath the smooth glass cooktop surface on your range. The element is (2500 watts) and is used on some electric range models to provide instant heat for a much faster cooking time than a conventional coil surface element. Please remember to unplug or disconnect the electricity to your range before removing or replacing any parts.
Part Number – WP660532
This small surface coil element is used for some electric model ranges, on the cooktop surface. The element measures 6 inches in diameter and has rolled terminal ends. If you have a surface element that is not heating, you can test it for continuity using a multi-meter. If the surface element shows that it has continuity the part is good, and you will need to test the element terminal and the surface element switch. Note: Please be sure that your range has had plenty of time to cool down before testing or removing any internal or external parts.
Part Number – WP3412D024-26
This burner head is located on the cooktop surface on some gas range models. It is grey in color and comes with a spark electrode. You will need to rotate / turn the burner counterclockwise an eighth of a turn to remove the burner head unit from the range cooktop. The manufacturer has updated this burner head and it no longer requires a gasket. Reasons for replacing your burner head are, the burner won’t light, enamel finish has cracked or worn off from extended use. Be sure and enter the model number to be certain that this is the correct replacement part for your particular appliance model.
Part Number – WP660533
This large surface coil element is used on the cooktop surface of some electric range models. The surface burner is 2600 watts and measures 8 inches in diameter. It has a five-turn burner coil with rolled terminal ends. If the surface element on your range is not heating, you can test the part for continuity using a digital or analog multi-meter. If the element shows that it has continuity, you will need to test for a broken range surface element switch, or the element terminal could be broken and isn’t making good contact. Note: Please be sure that your range has had plenty of time to cool down before testing or removing any internal or external parts. Some range parts can hold heat for quite some time and will still burn you long after the appliance has been turned off.
Search by Brand Name
Shop best-selling replacement parts
References to the manufacturer’s name, logo and or OEM parts numbers are for identification purposes only. Cheap Appliance Parts © 2022