Whirlpool Oven Parts

View Whirlpool Oven Replacement Parts Category

Whirlpool Oven Temperature Sensor

Part Number – WPW10181986

This oven sensor works in conjunction with the oven main control board to regulate and measure the temperature in the oven.  If you have noticed the oven temperature is inaccurate or fluctuates by 50 degrees or more, the sensor is more than likely defective and will need to be replaced with a new part.  Please be sure to use your model number when searching for parts, to be sure that it is the correct part for your particular oven.

Whirlpool Oven Broil Element

Part Number – W10856603

This broil element is a genuine OEM part, it is located on the top of the oven cavity and used for broiling with.  The element is quite often used to help preheat the oven faster for baking.  If this part is bad you should be able to see some visual damage, such as, blistering, bubbles, burned marks, burnt or melted terminal ends or even a broken element.  If any of the mentioned damage is present to the element, it will need to be replaced with a new one.  Please Be aware: that some oven parts can hold residual heat for quite a while after the unit has been turned off.  It is suggest that you wear gloves while performing any tests or troubleshooting any oven elements, to prevent bodily injuries.

Whirlpool Oven Surface Burner 8″

Parts Number – WP660533

This large surface burner part is used on the cooktop surface of some Whirlpool electric oven models.  The surface burner is 2600 watts and measures 8″ in diameter.  It has a five-turn coil with rolled terminal ends, for easy removal and replacement.  If your surface burner is not heating, you can test the part for continuity with a multi-meter.  If the burner element has continuity, it is good, and you will need to test the surface burner switch and the burner terminal and replace them if needed.  Remember to unplug or disconnect the electrical power to the appliance before you begin to repair it.

Whirlpool Oven Thermal Fuse

Part Number – WP3196548

This thermal fuse is used as a safety device in case the oven should overheat. This fuse will shut the oven off to prevent a fire.  Please remember to unplug or disconnect the electricity to your oven before making this repair.

Whirlpool Electric Oven Bake Element

Part Number – WPW10308477

This bake element is a genuine OEM part that is located inside the bottom of some free standing electric oven models.  The bake element has (2) flat push-on spade terminal ends.  Some common symptoms of a bad bake element are,  the element will not heat, trips the circuit breakers when turned on or blows a fuse.  Remember to disconnect the electricity to the oven before attempting to repair it or you can turn the breaker dedicated to the unit off or pull the main fuses.  Please be sure to enter your model number to ensure that this is the correct part for your appliance.

Whirlpool Gas Oven Safety Valve

Part Number – WPW10293048
This gas valve is used on a gas oven to sense a desired amount of heat.
 Once it has sensed the desired amount of heat it will open the valve to
let the gas flow to the oven burner where it will then be ignited into
flame and used to heat the oven.   Always unplug or disconnect the
electrical power source to the unit before attempting to repair it.

Whirlpool Gas Oven Bake / Broil Igniter

Part Number – WP8054129

This part is used to ignite the oven gas burner with its spark electrode.  It is the ignition device for the bake or broil setting on your oven.  The common symptom of a bad igniter is, the burner will not light.  Please remember to disconnect your appliance from its electrical power source and turn off the gas before attempting to repair it.

Touch-up Paint (White)

Part Number – 72017

This touch-up paint can be used on the exterior of your white range, stove or oven.  If your oven has unsightly chips or scratches, this touch-up paint will fix the damaged areas.  The paint is white in color and comes in a 6 fluid ounce bottle with a brush for an easy touch-up application on your ovens outer metal surface.

Whirlpool Oven Surface Element 6″

Part Number – WP660532

This surface element is used for an electric oven on top of the cooktop surface.  This element measures 6″ in diameter with rolled terminal ends.  If the element is not heating it can be tested for continuity using a multi-meter.  If the surface element has continuity the part is good and you will need to test the element terminal and the surface element switch.  Always remember to disconnect the electricity to your appliance before you remove or replace any parts.

Whirlpool Oven Surface Heating Element 6″

Part Number – WPW10345407

This heating element measures 6″ and is used on the surface of the oven for cooking.  It is a three turn coil element with rolled terminal ends to push in or pull out of the oven receptacle.  Disconnect the power to the oven before replacing this part.  Please be sure and use your model number on your appliance to ensure that this is the correct replacement part for your specific model.

Appliance Category

Site Information

Home Page

About Us



Model Number Help 

Locating Your Model #

Terms & Conditions


Shipping Information

Same Day Shipping


References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only.  Cheap Appliance Parts © 2022