Whirlpool Stove Parts
View Whirlpool Stove Parts Category
Part Number – WPW10308477
This bake element is located inside the bottom part of the oven cavity, on some free standing electric stove models. The bake element has (2) flat push-on spade terminal ends. Some common symptoms of a bad baking element are, the element will not heat, trips the circuit breakers when the stove is turned on or blows a fuse. Remember to disconnect the electricity to your appliance before you begin to repair it or you can turn the breaker dedicated to the unit off. Please be sure to enter your model number to ensure that this is the correct part for your particular electric stove.
Part Number – WP660533
This surface element is used on the cooktop surface of some electric stove models. The surface element is 2600 watts and measures 8 inches in diameter. It has a five turn coil element with rolled terminal ends. If your stove has a surface element that is not heating, you can test the part for continuity using a digital or analog multi-meter. Please be aware: that some stove parts can hold their heat for quite a while after you have turned the appliance off. It is suggest that you wear gloves while performing tests or inspecting a surface element, to prevent any injuries. If the element shows that it has continuity you will need to test the surface element switch and the elements terminal block and replace them if they are bad.
Part Number – WP3196548
This thermal fuse is used as a safety device in case the stove should ever overheat. The fuse will shut the stove off to prevent a fire or any further damage to the appliance. Please remember to disconnect the electricity to your stove before replacing this part.
Part Number – W10856603
This broil element is located on the top of the oven cavity on some stove models, and is used for broiling with. The element is often used to help preheat the oven faster when baking or cooking. If the broiling element is bad you should be able to see some visual damage, such as, blistering, bubbles, burned marks, burnt or melted terminal ends. If any of the mentioned damage is present to the element, it will need to be replaced.
Part Number – WPW10293048
This gas valve is used on a gas Stove to sense a desired amount of heat.
Once it has sensed the desired amount of heat it will open the valve to
let the gas flow through to the oven burner where it will then be ignited
and used to heat the oven with. Please remember to disconnect the
electricity and turn the gas off to the unit before replacing your gas valve.
Part Number – WPW10345407
This heating element measures 6 inches in diameter and is used on the surface of a stoves top for cooking on. It is a three turn coil element with rolled terminal ends that simply push in or pull out of the receptacle or terminal block. Don’t forget to disconnect the electricity to the unit before you begin to service it. Please be sure and use the model number to be sure that this is the correct small element for your stove model.
Part Number – WP8054129
This igniter is used to ignite the ovens gas burner with its spark electrode. It is the ignition device for the bake or broil setting on some stove models. The common symptom of a bad igniter is, the gas burner will not light.
Part Number – WPW10181986
This temperature sensor works in conjunction with the stoves main control board to regulate and measure the temperature inside of the oven compartment. If you have noticed that your ovens temperature is inaccurate or fluctuates by 50 degrees or more, the sensor is more than likely defective and it will need to be replaced with a new sensor. Please be sure to use your model number when ordering this part.
Part Number – 72017
This touch-up paint can be used on the exterior of your white stove. If your gas or electric stove has unsightly chips or scratches, this touch-up paint will fix the damaged areas. The paint is white in color and comes in a 6 fluid ounce bottle with a brush for a smooth and easy touch-up application to the metal exterior cabinet of your appliance.
Part Number – WP660532
This surface element is used on the cooktop surface of some electric stove models. The surface element measures 6 inches in diameter and it has rolled terminal ends. If your stove has an surface element that is not heating, you can test it to see if it has continuity by using a multi-meter. If your element shows that it has continuity, the part is good and you will need to test the element terminal and the element control switch also called the infinite switch.
All of the parts on this site are authentic (OEM) Original Equipment Manufacturer replacement parts, unless otherwise noted in the detailed products description.
Admiral Parts | Amana Parts | Bosh Parts | Crosley Parts | Electrolux Parts | Estate Parts | Frigidaire Parts | GE Parts | Hotpoint Parts | Inglis OEM Parts | Jenn Air Parts | Kenmore Parts | LG Parts | Maytag Parts | Roper Parts | Samsung Parts | Whirlpool Parts | Dryer Parts | Dishwasher Parts | Washer Parts | Refrigerator Parts | Oven Parts | Range Parts | Stove Parts | Appliance Parts
References to the manufacturer’s name, logo and or OEM part numbers are for identification purposes only. Cheap Appliance Parts © 2021