Whirlpool Washer Parts

Need help finding the model number on your washer?

View Whirlpool Washer Parts Category

Whirlpool Washer Motor Coupler

Parts Number – 285753A

This washer motor coupler parts kit is used for some beltless direct drive washers. The coupler is a three-piece component, consisting of (2) drive plates and (1) rubber bushing. These OEM replacement parts are the new and improved version of the older style coupler, both of the drive plates have an added metal shaft sleeve for extra durability. The motor coupler is used between the washer motor and the transmission. One of the drive plates is used on the motor shaft and the other drive plate is used on the transmission shaft, with the rubber bushing being between both of the plates. The most common symptoms of a broken washer motor coupler are, the washer’s tub will fill with water and drain the water, but it will not agitate or spin the wash basket. You might see small pieces of black rubber on the floor under the washer, this indicates a worn-out rubber coupler bushing. You will need to tilt the washer back just enough to be able to see it.

Whirlpool Direct Drive Washer Pump

Part Number – WP3363394

This is a genuine OEM washer pump that is used on some direct drive washers, meaning that the pump is not driven by a belt, instead the pump is connected directly to the washing machine motor shaft. The most common symptom that the drain pump has failed is the washer will not pump the water from the tub after the wash cycle is done. Repair tip: you will want to check the pump ports and the impeller for blockage or clogs, before replacing the pump with a new one.

Whirlpool Washer Water Inlet Valve

Part Number – 285805

This genuine OEM replacement water inlet valve comes with a metal support bracket, the valve is located on the backside of your washing machine, it has two hoses connecting to it that lead to the water supply faucets mounted in the wall, one hot water line and one cold water line. You will need to lift the lid of the washer to gain access to the inlet valve to replace it. Please make sure that you unplug the washer and turn both hot and cold water supplies off before you begin this repair. The most common signs of this part failure are, the tub won’t fill with water, no hot water, no cold water, water fills the tub even when the machine is turned off.

Whirlpool Washer Timer

Part Number – WPW10199989

This washer timer controls most of the functions within the washer during its various cycles. The timer is used to control when certain functions begin, end and for how long they will last. Some of the most common signs that a timer has failed are, the cycle will not advance, the washer will not fill with water, will not pump the water out, will not shut off, the washing machine will not run at all.

Whirlpool Washer Suspension Spring

Part Number – WP63907

Washer suspension spring. Used to help keep the washer tub balanced during all of the wash cycles. The most common signs that this part has failed are, the washer makes loud noises, shakes during the spin cycle, moves around during the wash cycles. If you have noticed one or more of these symptoms, a broken or lost washer suspension spring may be the cause.

Whirlpool Washer Belt

Part Number – WPW10006384

Washer drive belt. Goes around both the motor pulley and the drive pulley. The belt is located on the bottom of the washing machine. You will need to tilt the unit forward to gain access to replace the belt. Remember to always disconnect your appliance from its electrical source before attempting to fix it.

Whirlpool Washer Lid Switch

Part Number – WP8318084

Washer lid switch. This part is used for a top load washer. The switch is located under the control panel on the top of the washer. You will need to lift the control panel up and back away from the top of the washer to replace the lid switch. Some signs that this part has failed are, the washing machine won’t start, timer will not advance, tub basket will not spin.

Whirlpool Top Load Washer Agitator Repair Kit

Part Number – 285751

Top load washer agitator parts kit. Comes with (4) directional cogs, also known as dog ears. The kit also comes with the agitator cam. The main symptoms that these parts have failed are, the top part of the agitator will not catch and rotate properly, the top half of the agitator should catch and ratchet in one direction when the washing machine is in the wash cycle. If you have noticed that the top part of the agitator in your washing machine will not agitate these genuine OEM replacement parts should fix the problem.

Whirlpool Washer Main Tub Seal

Part Number – W10324647

Washer tub seal. This part is used to prevent water from leaking around the transmission basket drive shaft down through the center of the wash tub and on to the floor. If you have noticed water leaking around the transmission, at the bottom of your washing machine, this part should be replaced. Repair Note: This part can be a difficult to replace. If you have little or no mechanical experience, it is recommended that this washer repair be performed by a qualified appliance technician.

Whirlpool Washer Timer Knob

Part Number – WPW10711289

This timer knob is white in color and has a female fitting that accepts a (D) shaped shaft, located on the washing machines timer. This knob simply pulls off and pushes on to the timer shaft. No tools are needed for the easy removal and replacement of this knob. Please compare the back of your knob with this knob before ordering, to ensure that you are getting the correct part for your specific model.